IPE-Träger: Profiltabelle mit Abmessungen und Querschnittswerten
Abmessungen und Querschnittswerte der IPE-Träger nach EN 10365 sowie der halbierten T-Profile (½IPE).
IPE-Träger
| Profil | Geometrie und Gewicht | Iₚ | Achse y–y | Achse z–z | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| h | b | tw | tf | r₁ | A | P | Gewicht | Iₚ ⨯10⁶ | Iᵧ ⨯10⁶ | Wᵧ ⨯10³ | Wpl,ᵧ ⨯10³ | iᵧ | Sᵧ ⨯10³ | Iz ⨯10⁶ | Wz ⨯10³ | Wpl,z ⨯10³ | iz | Sz ⨯10³ | |
| [mm] | [mm] | [mm] | [mm] | [mm] | [mm²] | [mm] | [kg/m] | [mm⁴] | [mm⁴] | [mm³] | [mm³] | [mm] | [mm³] | [mm⁴] | [mm³] | [mm³] | [mm] | [mm³] | |
| IPE 80 | 80,00 | 46,00 | 3,80 | 5,20 | 5,00 | 764 | 328 | 6,00 | 0,886 | 0,802 | 20,04 | 23,22 | 32,38 | 11,61 | 0,0849 | 3,69 | 5,82 | 10,54 | 2,91 |
| IPE 100 | 100,00 | 55,00 | 4,10 | 5,70 | 7,00 | 1 033 | 400 | 8,11 | 1,87 | 1,71 | 34,21 | 39,42 | 40,70 | 19,71 | 0,159 | 5,79 | 9,15 | 12,42 | 4,57 |
| IPE 120 | 120,00 | 64,00 | 4,40 | 6,30 | 7,00 | 1 321 | 475 | 10,37 | 3,45 | 3,18 | 52,97 | 60,74 | 49,04 | 30,37 | 0,277 | 8,65 | 13,58 | 14,47 | 6,79 |
| IPE 140 | 140,00 | 73,00 | 4,70 | 6,90 | 7,00 | 1 643 | 551 | 12,90 | 5,86 | 5,41 | 77,33 | 88,36 | 57,40 | 44,18 | 0,449 | 12,31 | 19,25 | 16,54 | 9,62 |
| IPE 160 | 160,00 | 82,00 | 5,00 | 7,40 | 9,00 | 2 010 | 623 | 15,77 | 9,38 | 8,69 | 108,69 | 123,89 | 65,78 | 61,94 | 0,683 | 16,66 | 26,10 | 18,44 | 13,05 |
| IPE 180 | 180,00 | 91,00 | 5,30 | 8,00 | 9,00 | 2 395 | 698 | 18,80 | 14,18 | 13,17 | 146,36 | 166,45 | 74,16 | 83,22 | 1,01 | 22,17 | 34,60 | 20,52 | 17,30 |
| IPE 200 | 200,00 | 100,00 | 5,60 | 8,50 | 12,00 | 2 849 | 768 | 22,37 | 20,86 | 19,44 | 194,37 | 220,70 | 82,60 | 110,35 | 1,42 | 28,47 | 44,62 | 22,35 | 22,31 |
| IPE 220 | 220,00 | 110,00 | 5,90 | 9,20 | 12,00 | 3 338 | 848 | 26,20 | 29,77 | 27,73 | 252,05 | 285,48 | 91,14 | 142,74 | 2,05 | 37,25 | 58,12 | 24,78 | 29,06 |
| IPE 240 | 240,00 | 120,00 | 6,20 | 9,80 | 15,00 | 3 913 | 922 | 30,72 | 41,77 | 38,93 | 324,41 | 366,76 | 99,75 | 183,38 | 2,84 | 47,27 | 73,93 | 26,92 | 36,97 |
| IPE 270 | 270,00 | 135,00 | 6,60 | 10,20 | 15,00 | 4 596 | 1 041 | 36,08 | 62,11 | 57,91 | 428,99 | 484,13 | 112,26 | 242,07 | 4,20 | 62,20 | 96,96 | 30,23 | 48,48 |
| IPE 300 | 300,00 | 150,00 | 7,10 | 10,70 | 15,00 | 5 382 | 1 160 | 42,25 | 89,62 | 83,58 | 557,21 | 628,51 | 124,61 | 314,25 | 6,04 | 80,51 | 125,23 | 33,49 | 62,61 |
| IPE 330 | 330,00 | 160,00 | 7,50 | 11,50 | 18,00 | 6 262 | 1 254 | 49,16 | 125,59 | 117,70 | 713,36 | 804,57 | 137,10 | 402,29 | 7,88 | 98,52 | 153,70 | 35,48 | 76,85 |
| IPE 360 | 360,00 | 170,00 | 8,00 | 12,70 | 18,00 | 7 275 | 1 353 | 57,11 | 173,13 | 162,70 | 903,88 | 1 019,41 | 149,55 | 509,70 | 10,43 | 122,76 | 191,12 | 37,87 | 95,56 |
| IPE 400 | 400,00 | 180,00 | 8,60 | 13,50 | 21,00 | 8 449 | 1 467 | 66,32 | 244,53 | 231,35 | 1 156,77 | 1 307,55 | 165,48 | 653,77 | 13,18 | 146,43 | 229,03 | 39,50 | 114,51 |
| IPE 450 | 450,00 | 190,00 | 9,40 | 14,60 | 21,00 | 9 884 | 1 605 | 77,59 | 354,28 | 337,52 | 1 500,09 | 1 702,24 | 184,79 | 851,12 | 16,76 | 176,41 | 276,41 | 41,18 | 138,20 |
| IPE 500 | 500,00 | 200,00 | 10,20 | 16,00 | 21,00 | 11 554 | 1 743 | 90,70 | 503,52 | 482,10 | 1 928,40 | 2 194,62 | 204,27 | 1 097,31 | 21,42 | 214,17 | 335,91 | 43,05 | 167,95 |
| IPE 550 | 550,00 | 210,00 | 11,10 | 17,20 | 24,00 | 13 445 | 1 877 | 105,54 | 698,02 | 671,35 | 2 441,26 | 2 787,73 | 223,46 | 1 393,86 | 26,68 | 254,06 | 400,58 | 44,54 | 200,29 |
| IPE 600 | 600,00 | 220,00 | 12,00 | 19,00 | 24,00 | 15 601 | 2 015 | 122,47 | 954,92 | 921,05 | 3 070,17 | 3 513,19 | 242,97 | 1 756,60 | 33,87 | 307,95 | 485,69 | 46,60 | 242,85 |
T-Profile (½IPE)
| Profil | Geometrie und Gewicht | Iₚ | Achse y–y | Achse z–z | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| h | b | tw | tf | r₁ | Cz | A | P | Gewicht | Iₚ ⨯10⁶ | Iᵧ ⨯10⁶ | Wᵧ (t) ⨯10³ | Wᵧ (b) ⨯10³ | Wpl,ᵧ ⨯10³ | epl,ᵧ | iᵧ | Sᵧ ⨯10³ | Iz ⨯10⁶ | Wz ⨯10³ | Wpl,z ⨯10³ | iz | Sz ⨯10³ | |
| [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm²] | [mm] | [kg/m] | [mm⁴] | [mm⁴] | [mm³] | [mm³] | [mm³] | [mm] | [mm] | [mm³] | [mm⁴] | [mm³] | [mm³] | [mm] | [mm³] | |
| 1/2 IPE 140 | 70,00 | 73,00 | 4,70 | 6,90 | 7,00 | 53,78 | 821 | 280 | 6,45 | 0,555 | 0,330 | 20,38 | 6,14 | 11,01 | 10,59 | 20,06 | 6,80 | 0,225 | 6,15 | 9,62 | 16,54 | 4,81 |
| 1/2 IPE 160 | 80,00 | 82,00 | 5,00 | 7,40 | 9,00 | 61,65 | 1 005 | 316 | 7,89 | 0,870 | 0,529 | 28,81 | 8,57 | 15,36 | 12,22 | 22,94 | 9,50 | 0,342 | 8,33 | 13,05 | 18,44 | 6,53 |
| 1/2 IPE 180 | 90,00 | 91,00 | 5,30 | 8,00 | 9,00 | 69,49 | 1 198 | 354 | 9,40 | 1,31 | 0,803 | 39,14 | 11,55 | 20,62 | 13,93 | 25,89 | 12,80 | 0,504 | 11,08 | 17,30 | 20,52 | 8,65 |
| 1/2 IPE 200 | 100,00 | 100,00 | 5,60 | 8,50 | 12,00 | 77,46 | 1 425 | 390 | 11,18 | 1,88 | 1,17 | 51,94 | 15,11 | 27,03 | 15,41 | 28,66 | 16,80 | 0,712 | 14,24 | 22,31 | 22,35 | 11,15 |
| 1/2 IPE 220 | 110,00 | 110,00 | 5,90 | 9,20 | 12,00 | 85,53 | 1 669 | 430 | 13,10 | 2,68 | 1,65 | 67,60 | 19,34 | 34,51 | 16,89 | 31,48 | 21,58 | 1,02 | 18,63 | 29,06 | 24,78 | 14,53 |
| 1/2 IPE 240 | 120,00 | 120,00 | 6,20 | 9,80 | 15,00 | 93,74 | 1 956 | 467 | 15,36 | 3,69 | 2,27 | 86,62 | 24,27 | 43,41 | 18,11 | 34,10 | 27,24 | 1,42 | 23,64 | 36,97 | 26,92 | 18,48 |
| 1/2 IPE 270 | 135,00 | 135,00 | 6,60 | 10,20 | 15,00 | 105,35 | 2 298 | 527 | 18,04 | 5,56 | 3,46 | 116,55 | 32,81 | 58,36 | 21,14 | 38,78 | 36,62 | 2,10 | 31,10 | 48,48 | 30,23 | 24,24 |
| 1/2 IPE 300 | 150,00 | 150,00 | 7,10 | 10,70 | 15,00 | 116,77 | 2 691 | 587 | 21,13 | 8,11 | 5,09 | 153,32 | 43,63 | 77,35 | 24,26 | 43,51 | 48,41 | 3,02 | 40,25 | 62,61 | 33,49 | 31,31 |
| 1/2 IPE 330 | 165,00 | 160,00 | 7,50 | 11,50 | 18,00 | 128,48 | 3 131 | 635 | 24,58 | 11,11 | 7,17 | 196,24 | 55,78 | 99,03 | 26,74 | 47,84 | 61,90 | 3,94 | 49,26 | 76,85 | 35,48 | 38,42 |
| 1/2 IPE 360 | 180,00 | 170,00 | 8,00 | 12,70 | 18,00 | 140,13 | 3 637 | 685 | 28,55 | 15,14 | 9,92 | 248,89 | 70,81 | 125,55 | 29,17 | 52,23 | 78,55 | 5,22 | 61,38 | 95,56 | 37,87 | 47,78 |
| 1/2 IPE 400 | 200,00 | 180,00 | 8,60 | 13,50 | 21,00 | 154,77 | 4 224 | 742 | 33,16 | 21,09 | 14,50 | 320,47 | 93,67 | 166,30 | 33,50 | 58,58 | 102,99 | 6,59 | 73,21 | 114,51 | 39,50 | 57,26 |
| 1/2 IPE 450 | 225,00 | 190,00 | 9,40 | 14,60 | 21,00 | 172,22 | 4 942 | 812 | 38,80 | 30,56 | 22,18 | 420,26 | 128,81 | 228,72 | 39,78 | 67,00 | 139,40 | 8,38 | 88,21 | 138,20 | 41,18 | 69,10 |
| 1/2 IPE 500 | 250,00 | 200,00 | 10,20 | 16,00 | 21,00 | 189,94 | 5 777 | 882 | 45,35 | 43,34 | 32,63 | 543,25 | 171,78 | 305,27 | 45,62 | 75,15 | 183,99 | 10,71 | 107,09 | 167,95 | 43,05 | 83,98 |
| 1/2 IPE 550 | 275,00 | 210,00 | 11,10 | 17,20 | 24,00 | 207,35 | 6 722 | 949 | 52,77 | 59,99 | 46,65 | 689,64 | 225,00 | 400,96 | 51,64 | 83,31 | 238,62 | 13,34 | 127,03 | 200,29 | 44,54 | 100,14 |
| 1/2 IPE 600 | 300,00 | 220,00 | 12,00 | 19,00 | 24,00 | 225,19 | 7 801 | 1 019 | 61,24 | 81,90 | 64,97 | 868,36 | 288,50 | 514,46 | 57,09 | 91,26 | 304,25 | 16,94 | 153,97 | 242,85 | 46,60 | 121,42 |
Die Werte werden mit dem Querschnittswerte-Rechner berechnet. Sie weichen von den veröffentlichten Katalogwerten in der Regel um etwa 0,5 % ab, in seltenen Fällen um bis zu 1 %, vor allem bei kleinen Profilen. So werden die Werte berechnet.
Über IPE-Träger
IPE ist der europäische Standard-I-Träger mit parallelen Flanschen, gewalzt nach EN 10365. Die Flansche sind im Verhältnis zur Höhe schmal, daher eignet sich der Querschnitt vor allem für Biegung um die starke Achse: Deckenträger, Pfetten und Nebenträger. Die Zahl in der Bezeichnung ist die Nennhöhe in Millimetern – ein IPE 200 ist 200 mm hoch. Für Stützen und hoch belastete Träger kommen die Breitflanschträger HEA, HEB und HEM zum Einsatz.
T-Profile (½IPE) entstehen durch Längsteilung eines IPE-Trägers in Stegmitte: Jede Hälfte behält den vollen Flansch und hat die halbe Höhe.
Formelzeichen
Formelzeichen in den Tabellen der IPE-Träger und T-Profile. Die Einheiten stehen in den Tabellenköpfen.
Geometrie und Gewicht
- Profil
- Profilbezeichnung laut Katalog.
- h
- Gesamthöhe des Querschnitts.
- b
- Flanschbreite.
- tw
- Stegdicke.
- tf
- Flanschdicke.
- r1
- Ausrundungsradius zwischen Steg und Flansch.
- A
- Querschnittsfläche.
- P
- Umfang der äußeren Querschnittskontur.
- Gewicht
- Berechnetes Metergewicht bei einer Stahldichte von 7850 kg/m³.
- Cz
- Schwerpunktkoordinate, gemessen von der linken unteren Bezugsecke der Kontur; nur für T-Profile angegeben.
Biegekennwerte
- Iy, Iz
- Flächenträgheitsmomente um die Schwerachsen y–y und z–z.
- Ip
- Polares Flächenträgheitsmoment bezogen auf den Schwerpunkt, gleich Iy + Iz.
- Wy
- Elastisches Widerstandsmoment um die Achse y–y. Bei T-Profilen beziehen sich Wy(t) und Wy(b) auf die obere bzw. untere Randfaser.
- Wz
- Elastisches Widerstandsmoment um die Achse z–z.
- iy, iz
- Trägheitsradien um die Achsen y–y und z–z: i = √(I/A).
- Sy, Sz
- Statische Momente der halben Querschnittsfläche um die Schwerachsen y–y und z–z.
Plastische Kennwerte
- Wpl,y, Wpl,z
- Plastische Widerstandsmomente für Biegung um die Achsen y–y und z–z, bezogen auf die plastischen Nulllinien.
- epl,y
- Abstand der plastischen Nulllinie von der Schwerachse y–y; nur für T-Profile angegeben.
In der mm-Ansicht werden Größen vierten Grades in Vielfachen von 10⁶ und Größen dritten Grades in Vielfachen von 10³ angegeben; der Faktor im Tabellenkopf gilt für alle Werte der Spalte.