UPN & UPE Channels: Dimensions & Section Properties
Dimensions and section properties of UPN and UPE channels to EN 10365
UPN channels
| Section | Geometry and Mass | Iₚ | Axis y–y | Axis z–z | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| h | b | tw | tf | b₁ | i | r₁ | r₂ | Cy | A | P | Mass | Iₚ ⨯10⁶ | Iᵧ ⨯10⁶ | Wᵧ ⨯10³ | Wpl,ᵧ ⨯10³ | iᵧ | Sᵧ ⨯10³ | Iz ⨯10⁶ | Wz,max ⨯10³ | Wz,min ⨯10³ | Wpl,z ⨯10³ | epl,z | iz | Sz ⨯10³ | |
| [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm²] | [mm] | [kg/m] | [mm⁴] | [mm⁴] | [mm³] | [mm³] | [mm] | [mm³] | [mm⁴] | [mm³] | [mm³] | [mm³] | [mm] | [mm] | [mm³] | ||
| UPN 50 | 50.00 | 38.00 | 5.00 | 7.00 | 19.00 | 0.08 | 7.00 | 3.50 | 13.69 | 712 | 229 | 5.59 | 0.356 | 0.265 | 10.60 | 12.98 | 19.29 | 6.49 | 0.0910 | 6.65 | 3.74 | 6.89 | -3.08 | 11.30 | 3.52 |
| UPN 65 | 65.00 | 42.00 | 5.50 | 7.50 | 21.00 | 0.08 | 7.50 | 4.00 | 14.24 | 903 | 273 | 7.09 | 0.715 | 0.575 | 17.70 | 21.41 | 25.24 | 10.71 | 0.140 | 9.82 | 5.03 | 9.48 | -4.37 | 12.44 | 4.90 |
| UPN 80 | 80.00 | 45.00 | 6.00 | 8.00 | 22.50 | 0.08 | 8.00 | 4.00 | 14.52 | 1 102 | 313 | 8.65 | 1.25 | 1.06 | 26.48 | 31.90 | 31.00 | 15.95 | 0.194 | 13.33 | 6.35 | 12.08 | -5.66 | 13.25 | 6.35 |
| UPN 100 | 100.00 | 50.00 | 6.00 | 8.50 | 25.00 | 0.08 | 8.50 | 4.50 | 15.50 | 1 345 | 372 | 10.56 | 2.35 | 2.05 | 41.07 | 48.97 | 39.07 | 24.48 | 0.291 | 18.80 | 8.45 | 16.21 | -6.83 | 14.72 | 8.59 |
| UPN 120 | 120.00 | 55.00 | 7.00 | 9.00 | 27.50 | 0.08 | 9.00 | 4.50 | 16.06 | 1 699 | 429 | 13.34 | 4.07 | 3.64 | 60.73 | 72.71 | 46.31 | 36.35 | 0.431 | 26.81 | 11.06 | 21.27 | -8.79 | 15.92 | 11.61 |
| UPN 140 | 140.00 | 60.00 | 7.00 | 10.00 | 30.00 | 0.08 | 10.00 | 5.00 | 17.55 | 2 037 | 487 | 15.99 | 6.67 | 6.05 | 86.41 | 102.78 | 54.49 | 51.39 | 0.625 | 35.59 | 14.72 | 28.32 | -9.49 | 17.51 | 15.36 |
| UPN 160 | 160.00 | 65.00 | 7.50 | 10.50 | 32.50 | 0.08 | 10.50 | 5.50 | 18.39 | 2 402 | 545 | 18.85 | 10.10 | 9.25 | 115.60 | 137.55 | 62.05 | 68.77 | 0.850 | 46.23 | 18.25 | 35.16 | -10.88 | 18.82 | 19.37 |
| UPN 180 | 180.00 | 70.00 | 8.00 | 11.00 | 35.00 | 0.08 | 11.00 | 5.50 | 19.28 | 2 797 | 603 | 21.95 | 14.67 | 13.54 | 150.45 | 179.13 | 69.58 | 89.56 | 1.13 | 58.85 | 22.38 | 43.07 | -11.51 | 20.14 | 24.03 |
| UPN 200 | 200.00 | 75.00 | 8.50 | 11.50 | 37.50 | 0.08 | 11.50 | 6.00 | 20.14 | 3 219 | 660 | 25.27 | 20.59 | 19.11 | 191.10 | 227.77 | 77.05 | 113.88 | 1.48 | 73.34 | 26.93 | 51.89 | -12.10 | 21.42 | 29.29 |
| UPN 220 | 220.00 | 80.00 | 9.00 | 12.50 | 40.00 | 0.08 | 12.50 | 6.50 | 21.45 | 3 745 | 718 | 29.40 | 28.87 | 26.91 | 244.67 | 291.51 | 84.78 | 145.75 | 1.96 | 91.33 | 33.45 | 64.37 | -12.94 | 22.87 | 36.37 |
| UPN 240 | 240.00 | 85.00 | 9.50 | 13.00 | 42.50 | 0.08 | 13.00 | 6.50 | 22.36 | 4 231 | 776 | 33.21 | 38.46 | 35.99 | 299.92 | 357.69 | 92.23 | 178.85 | 2.47 | 110.65 | 39.50 | 75.96 | -13.55 | 24.18 | 43.30 |
| UPN 260 | 260.00 | 90.00 | 10.00 | 14.00 | 45.00 | 0.08 | 14.00 | 7.00 | 23.68 | 4 829 | 833 | 37.90 | 51.42 | 48.25 | 371.12 | 442.44 | 99.96 | 221.22 | 3.17 | 133.99 | 47.83 | 91.90 | -14.39 | 25.63 | 52.39 |
| UPN 280 | 280.00 | 95.00 | 10.00 | 15.00 | 47.50 | 0.08 | 15.00 | 7.50 | 25.32 | 5 342 | 891 | 41.94 | 66.75 | 62.76 | 448.31 | 532.00 | 108.39 | 266.00 | 3.98 | 157.22 | 57.14 | 109.80 | -15.78 | 27.30 | 62.02 |
| UPN 300 | 300.00 | 100.00 | 10.00 | 16.00 | 50.00 | 0.08 | 16.00 | 8.00 | 27.00 | 5 877 | 949 | 46.13 | 85.21 | 80.28 | 535.22 | 632.41 | 116.88 | 316.21 | 4.93 | 182.61 | 67.55 | 129.90 | -17.21 | 28.97 | 72.68 |
| UPN 320 | 320.00 | 100.00 | 14.00 | 17.50 | 41.25 | 0.05 | 17.50 | 9.00 | 26.02 | 7 592 | 983 | 59.59 | 114.95 | 108.97 | 681.04 | 827.20 | 119.81 | 413.60 | 5.98 | 229.87 | 80.84 | 152.49 | -14.16 | 28.07 | 89.00 |
| UPN 350 | 350.00 | 100.00 | 14.00 | 16.00 | 42.00 | 0.05 | 16.00 | 8.00 | 24.00 | 7 734 | 1 045 | 60.71 | 134.40 | 128.67 | 735.28 | 900.67 | 128.98 | 450.33 | 5.72 | 238.45 | 75.31 | 142.92 | -12.95 | 27.20 | 85.77 |
| UPN 380 | 380.00 | 102.00 | 13.50 | 16.00 | 43.00 | 0.05 | 16.00 | 8.00 | 23.89 | 8 047 | 1 114 | 63.17 | 164.07 | 157.90 | 831.04 | 1 016.75 | 140.08 | 508.37 | 6.17 | 258.32 | 79.00 | 149.63 | -13.30 | 27.69 | 90.57 |
| UPN 400 | 400.00 | 110.00 | 14.00 | 18.00 | 46.00 | 0.05 | 18.00 | 9.00 | 26.85 | 9 168 | 1 182 | 71.97 | 212.73 | 204.18 | 1 020.90 | 1 239.50 | 149.23 | 619.75 | 8.55 | 318.42 | 102.80 | 193.60 | -15.39 | 30.53 | 115.62 |
UPE channels
| Section | Geometry and Mass | Iₚ | Axis y–y | Axis z–z | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| h | b | tw | tf | r₁ | Cy | A | P | Mass | Iₚ ⨯10⁶ | Iᵧ ⨯10⁶ | Wᵧ ⨯10³ | Wpl,ᵧ ⨯10³ | iᵧ | Sᵧ ⨯10³ | Iz ⨯10⁶ | Wz,max ⨯10³ | Wz,min ⨯10³ | Wpl,z ⨯10³ | epl,z | iz | Sz ⨯10³ | |
| [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm²] | [mm] | [kg/m] | [mm⁴] | [mm⁴] | [mm³] | [mm³] | [mm] | [mm³] | [mm⁴] | [mm³] | [mm³] | [mm³] | [mm] | [mm] | [mm³] | |
| UPE 80 | 80.00 | 50.00 | 4.00 | 7.00 | 10.00 | 18.17 | 1 007 | 343 | 7.91 | 1.33 | 1.07 | 26.81 | 31.23 | 32.63 | 15.62 | 0.254 | 13.99 | 7.98 | 13.95 | -4.14 | 15.89 | 7.09 |
| UPE 100 | 100.00 | 55.00 | 4.50 | 7.50 | 10.00 | 19.06 | 1 251 | 402 | 9.82 | 2.45 | 2.07 | 41.38 | 48.02 | 40.67 | 24.01 | 0.382 | 20.05 | 10.63 | 18.88 | -5.75 | 17.48 | 9.69 |
| UPE 120 | 120.00 | 60.00 | 5.00 | 8.00 | 12.00 | 19.83 | 1 542 | 460 | 12.11 | 4.19 | 3.64 | 60.60 | 70.35 | 48.56 | 35.17 | 0.554 | 27.94 | 13.79 | 24.80 | -7.80 | 18.95 | 12.91 |
| UPE 140 | 140.00 | 65.00 | 5.00 | 9.00 | 12.00 | 21.73 | 1 842 | 520 | 14.46 | 6.78 | 6.00 | 85.65 | 98.87 | 57.05 | 49.43 | 0.787 | 36.22 | 18.19 | 32.58 | -7.85 | 20.67 | 16.85 |
| UPE 160 | 160.00 | 70.00 | 5.50 | 9.50 | 12.00 | 22.69 | 2 168 | 579 | 17.02 | 10.18 | 9.11 | 113.90 | 131.63 | 64.84 | 65.82 | 1.07 | 47.08 | 22.58 | 40.72 | -9.60 | 22.20 | 21.26 |
| UPE 180 | 180.00 | 75.00 | 5.50 | 10.50 | 12.00 | 24.68 | 2 512 | 639 | 19.72 | 14.97 | 13.54 | 150.41 | 173.02 | 73.41 | 86.51 | 1.44 | 58.24 | 28.56 | 51.30 | -9.46 | 23.92 | 26.59 |
| UPE 200 | 200.00 | 80.00 | 6.00 | 11.00 | 13.00 | 25.60 | 2 901 | 697 | 22.77 | 20.97 | 19.10 | 190.96 | 220.13 | 81.13 | 110.06 | 1.87 | 73.18 | 34.43 | 62.20 | -11.39 | 25.41 | 32.56 |
| UPE 220 | 220.00 | 85.00 | 6.50 | 12.00 | 13.00 | 27.02 | 3 387 | 756 | 26.59 | 29.29 | 26.83 | 243.89 | 281.52 | 89.00 | 140.76 | 2.46 | 91.20 | 42.51 | 76.88 | -12.45 | 26.97 | 40.34 |
| UPE 240 | 240.00 | 90.00 | 7.00 | 12.50 | 15.00 | 27.91 | 3 852 | 813 | 30.24 | 39.10 | 35.99 | 299.95 | 346.95 | 96.66 | 173.47 | 3.11 | 111.40 | 50.08 | 90.85 | -14.38 | 28.41 | 48.19 |
| UPE 270 | 270.00 | 95.00 | 7.50 | 13.50 | 15.00 | 28.93 | 4 485 | 892 | 35.20 | 56.56 | 52.55 | 389.28 | 451.15 | 108.25 | 225.58 | 4.01 | 138.63 | 60.69 | 110.22 | -16.15 | 29.90 | 58.94 |
| UPE 300 | 300.00 | 100.00 | 9.50 | 15.00 | 15.00 | 28.86 | 5 662 | 968 | 44.45 | 83.62 | 78.24 | 521.61 | 613.42 | 117.55 | 306.71 | 5.38 | 186.27 | 75.58 | 136.72 | -19.43 | 30.82 | 75.90 |
| UPE 330 | 330.00 | 105.00 | 11.00 | 16.00 | 18.00 | 29.00 | 6 778 | 1 043 | 53.21 | 116.91 | 110.09 | 667.22 | 792.01 | 127.45 | 396.00 | 6.81 | 235.02 | 89.66 | 161.73 | -18.73 | 31.71 | 92.43 |
| UPE 360 | 360.00 | 110.00 | 12.00 | 17.00 | 18.00 | 29.70 | 7 792 | 1 121 | 61.17 | 156.71 | 148.27 | 823.75 | 982.47 | 137.95 | 491.24 | 8.44 | 284.08 | 105.07 | 189.25 | -18.88 | 32.91 | 109.62 |
| UPE 400 | 400.00 | 115.00 | 13.50 | 18.00 | 18.00 | 29.77 | 9 194 | 1 218 | 72.17 | 220.28 | 209.83 | 1 049.16 | 1 262.81 | 151.07 | 631.40 | 10.45 | 350.97 | 122.57 | 220.84 | -18.27 | 33.71 | 130.76 |
Values are calculated with the Section Properties Calculator. They usually differ from published catalog values by about 0.5%, and by up to 1% in rare cases, mostly for small sections. See how the values are calculated.
About UPN and UPE channels
UPN and UPE are European hot-rolled channels to EN 10365. In both, the number in the designation is the depth in millimetres — UPN 200 is 200 mm deep. The difference is in the flanges: UPN flanges are tapered on the inside, while UPE flanges are parallel, slightly wider and thinner. UPE is the newer series. Parallel flanges make bolted and welded connections simpler, since no tapered washers are needed, and for a similar depth UPE is usually a little lighter.
A channel is not symmetric about its web, so its shear centre lies outside the section, on the outer side of the web, away from the flanges. A load applied through the web therefore tends to twist a single channel. This is why channels are used where the load acts close to the shear centre or the member is restrained against twisting: edge and trimmer beams fixed to a slab or wall, stair stringers, frames around openings and bracing. The flat back of the web is also convenient for fixing against a wall or another member.
Two channels placed back to back or toe to toe form a symmetric section without this twisting effect. Such built-up members are a common choice for columns, lattice chords and struts.
Notations
Symbols used in the UPN and UPE channel tables. Units are shown in the table headings.
Geometry and mass
- Section
- Profile designation in the EN 10365 catalogue.
- h
- Overall section depth.
- b
- Flange width.
- tw
- Web thickness.
- tf
- Flange thickness.
- b1
- Distance from the free flange edge to the point where flange thickness is measured.
- i
- Slope of the inner flange face for UPN (8% or 5%).
- r1
- Root radius at the web-to-flange junction.
- r2
- Toe radius at the free flange edge.
- Cy
- Centroid coordinate measured from the back of the web.
- A
- Cross-sectional area.
- P
- Perimeter of the section's outer contour.
- Mass
- Calculated mass per metre using a steel density of 7,850 kg/m³.
Bending properties
- Iy, Iz
- Second moments of area about the centroidal y–y and z–z axes.
- Ip
- Polar second moment of area about the centroid, equal to Iy + Iz.
- Wy
- Elastic section modulus about the y–y axis.
- Wz,max, Wz,min
- Elastic section moduli about the z–z axis at the back of the web (max) and at the flange tips (min).
- iy, iz
- Radii of gyration about the y–y and z–z axes, respectively: i = √(I/A).
- Sy, Sz
- First moments of one half of the section area about the centroidal y–y and z–z axes.
Plastic properties
- Wpl,y, Wpl,z
- Plastic section moduli about the plastic neutral axes for bending about y–y and z–z.
- epl,z
- Signed offset of the plastic neutral axis from z–z; negative values indicate a shift toward the web.
In the mm view, table headings scale fourth-power properties by 10⁶ and cubic properties by 10³. The displayed multiplier applies to the values in that column.